dmesg - GOODRAM C40 - Intel Core 2 6300
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-32-generic (buildd@lgw01-43) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #37~14.04.1-Ubuntu SMP Thu Oct 22 09:41:40 UTC 2015 (Ubuntu 3.19.0-32.37~14.04.1-generic 3.19.8-ckt7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfd98fff] usable
BIOS-e820: [mem 0x00000000cfd99000-0x00000000cfda5fff] reserved
BIOS-e820: [mem 0x00000000cfda6000-0x00000000cfe3dfff] usable
BIOS-e820: [mem 0x00000000cfe3e000-0x00000000cfeabfff] ACPI NVS
BIOS-e820: [mem 0x00000000cfeac000-0x00000000cfeaefff] ACPI data
BIOS-e820: [mem 0x00000000cfeaf000-0x00000000cfef1fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfef2000-0x00000000cfefefff] ACPI data
BIOS-e820: [mem 0x00000000cfeff000-0x00000000cfefffff] usable
BIOS-e820: [mem 0x00000000cff00000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: /DG965SS, BIOS MQ96510J.86A.0816.2006.0716.2308 07/16/2006
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x12c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 0CFF00000 mask FFFF00000 uncachable
4 base 100000000 mask FE0000000 write-back
5 base 120000000 mask FF8000000 write-back
6 base 128000000 mask FFC000000 write-back
7 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4608MB, range: 128MB, type WB
reg 6, base: 4736MB, range: 64MB, type WB
total RAM covered: 4031M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4608MB, range: 128MB, type WB
reg 6, base: 4736MB, range: 64MB, type WB
e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x12be00000-0x12bffffff]
[mem 0x12be00000-0x12bffffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x120000000-0x12bdfffff]
[mem 0x120000000-0x12bdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11fffffff]
[mem 0x100000000-0x11fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfd98fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcfbfffff] page 2M
[mem 0xcfc00000-0xcfd98fff] page 4k
init_memory_mapping: [mem 0xcfda6000-0xcfe3dfff]
[mem 0xcfda6000-0xcfe3dfff] page 4k
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
init_memory_mapping: [mem 0xcfeff000-0xcfefffff]
[mem 0xcfeff000-0xcfefffff] page 4k
RAMDISK: [mem 0x34646000-0x3631afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000014 (v00 INTEL )
ACPI: RSDT 0x00000000CFEFD038 00004C (v01 INTEL DG965SS 00000330 01000013)
ACPI: FACP 0x00000000CFEFC000 000074 (v01 INTEL DG965SS 00000330 MSFT 01000013)
ACPI: DSDT 0x00000000CFEF8000 003EDA (v01 INTEL DG965SS 00000330 MSFT 01000013)
ACPI: FACS 0x00000000CFEAF000 000040
ACPI: APIC 0x00000000CFEF7000 000078 (v01 INTEL DG965SS 00000330 MSFT 01000013)
ACPI: WDDT 0x00000000CFEF6000 000040 (v01 INTEL DG965SS 00000330 MSFT 01000013)
ACPI: MCFG 0x00000000CFEF5000 00003C (v01 INTEL DG965SS 00000330 MSFT 01000013)
ACPI: ASF! 0x00000000CFEF4000 0000A6 (v32 INTEL DG965SS 00000330 MSFT 01000013)
ACPI: SSDT 0x00000000CFEF3000 0001BC (v01 INTEL CpuPm 00000330 MSFT 01000013)
ACPI: SSDT 0x00000000CFEF2000 000175 (v01 INTEL Cpu0Ist 00000330 MSFT 01000013)
ACPI: SSDT 0x00000000CFEAE000 000175 (v01 INTEL Cpu1Ist 00000330 MSFT 01000013)
ACPI: SSDT 0x00000000CFEAD000 000175 (v01 INTEL Cpu2Ist 00000330 MSFT 01000013)
ACPI: SSDT 0x00000000CFEAC000 000175 (v01 INTEL Cpu3Ist 00000330 MSFT 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012bffffff]
NODE_DATA(0) allocated [mem 0x12bff7000-0x12bffbfff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880127600000-ffff88012b5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12bffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcfd98fff]
node 0: [mem 0xcfda6000-0xcfe3dfff]
node 0: [mem 0xcfeff000-0xcfefffff]
node 0: [mem 0x100000000-0x12bffffff]
Initmem setup node 0 [mem 0x00001000-0x12bffffff]
On node 0 totalpages: 1031632
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13241 pages used for memmap
DMA32 zone: 847410 pages, LIFO batch:31
Normal zone: 2816 pages used for memmap
Normal zone: 180224 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfd99000-0xcfda5fff]
PM: Registered nosave memory: [mem 0xcfe3e000-0xcfeabfff]
PM: Registered nosave memory: [mem 0xcfeac000-0xcfeaefff]
PM: Registered nosave memory: [mem 0xcfeaf000-0xcfef1fff]
PM: Registered nosave memory: [mem 0xcfef2000-0xcfefefff]
PM: Registered nosave memory: [mem 0xcff00000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xd0000000-0xffefffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88012bc00000 s86144 r8192 d32640 u524288
pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1015490
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3948316K/4126528K available (7920K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 178212K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:456 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 1864.672 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3729.34 BogoMIPS (lpj=7458688)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 30021 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz (fam: 06, model: 0f, stepping: 06)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (7458.68 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcfe3e000-0xcfeabfff] (450560 bytes)
PM: Registering ACPI NVS region [mem 0xcfeaf000-0xcfef1fff] (274432 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:19:16, date: 03/06/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29a1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:29a4] type 00 class 0x078000
pci 0000:00:03.0: reg 0x10: [mem 0xe3325900-0xe332590f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:104b] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xe3300000-0xe331ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xe3324000-0xe3324fff]
pci 0000:00:19.0: reg 0x18: [io 0x30c0-0x30df]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x30a0-0x30bf]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x3080-0x309f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xe3325400-0xe33257ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe3320000-0xe3323fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x3020-0x303f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xe3325000-0xe33253ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415]
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0x3138-0x313f]
pci 0000:00:1f.2: reg 0x14: [io 0x314c-0x314f]
pci 0000:00:1f.2: reg 0x18: [io 0x3130-0x3137]
pci 0000:00:1f.2: reg 0x1c: [io 0x3148-0x314b]
pci 0000:00:1f.2: reg 0x20: [io 0x3110-0x311f]
pci 0000:00:1f.2: reg 0x24: [io 0x3100-0x310f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe3325800-0xe33258ff]
pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0x3128-0x312f]
pci 0000:00:1f.5: reg 0x14: [io 0x3144-0x3147]
pci 0000:00:1f.5: reg 0x18: [io 0x3120-0x3127]
pci 0000:00:1f.5: reg 0x1c: [io 0x3140-0x3143]
pci 0000:00:1f.5: reg 0x20: [io 0x30f0-0x30ff]
pci 0000:00:1f.5: reg 0x24: [io 0x30e0-0x30ef]
pci 0000:00:1f.5: PME# supported from D3hot
pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xe3000000-0xe3003fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe30fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe3400000-0xe34fffff]
pci 0000:03:00.0: [11ab:6101] type 00 class 0x01018f
pci 0000:03:00.0: reg 0x10: [io 0x1018-0x101f]
pci 0000:03:00.0: reg 0x14: [io 0x1024-0x1027]
pci 0000:03:00.0: reg 0x18: [io 0x1010-0x1017]
pci 0000:03:00.0: reg 0x1c: [io 0x1020-0x1023]
pci 0000:03:00.0: reg 0x20: [io 0x1000-0x100f]
pci 0000:03:00.0: reg 0x24: [mem 0xe3200000-0xe32001ff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.1: bridge window [mem 0xe3200000-0xe32fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xe3500000-0xe35fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xe3600000-0xe36fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xe3700000-0xe37fffff]
pci 0000:07:01.0: [168c:001a] type 00 class 0x020000
pci 0000:07:01.0: reg 0x10: [mem 0xe3100000-0xe310ffff]
pci 0000:07:03.0: [104c:8023] type 00 class 0x0c0010
pci 0000:07:03.0: reg 0x10: [mem 0xe3114000-0xe31147ff]
pci 0000:07:03.0: reg 0x14: [mem 0xe3110000-0xe3113fff]
pci 0000:07:03.0: supports D1 D2
pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe3100000-0xe31fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xefffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: Enabled 3 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfd99000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcfe3e000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcff00000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0500-0x053f] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0680-0x06ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 6 devices
Switched to clocksource acpi_pm
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8400000-0xf85fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8800000-0xf89fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xe3080000-0xe30fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe30fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xe3400000-0xe34fffff]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.1: bridge window [mem 0xe3200000-0xe32fffff]
pci 0000:00:1c.1: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xe3500000-0xe35fffff]
pci 0000:00:1c.2: bridge window [mem 0xf8400000-0xf85fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xe3600000-0xe36fffff]
pci 0000:00:1c.3: bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.4: bridge window [mem 0xe3700000-0xe37fffff]
pci 0000:00:1c.4: bridge window [mem 0xf8800000-0xf89fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: bridge window [mem 0xe3100000-0xe31fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xefffffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xe2000000-0xe30fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xe3400000-0xe34fffff]
pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf81fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xe3200000-0xe32fffff]
pci_bus 0000:03: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:04: resource 1 [mem 0xe3500000-0xe35fffff]
pci_bus 0000:04: resource 2 [mem 0xf8400000-0xf85fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:05: resource 1 [mem 0xe3600000-0xe36fffff]
pci_bus 0000:05: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:06: resource 1 [mem 0xe3700000-0xe37fffff]
pci_bus 0000:06: resource 2 [mem 0xf8800000-0xf89fffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xe3100000-0xe31fffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000e0000-0x000effff]
pci_bus 0000:07: resource 8 [mem 0xf8000000-0xfeafffff]
pci_bus 0000:07: resource 9 [mem 0xd0000000-0xefffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29524K (ffff880034646000 - ffff88003631b000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbd99000-0xcfd99000] (64MB) mapped at [ffff8800cbd99000-ffff8800cfd98fff]
microcode: CPU0 sig=0x6f6, pf=0x1, revision=0x44
microcode: CPU1 sig=0x6f6, pf=0x1, revision=0x44
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1457270356.827:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x3138 ctl 0x314c bmdma 0x3110 irq 19
ata2: SATA max UDMA/133 cmd 0x3130 ctl 0x3148 bmdma 0x3118 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0x3128 ctl 0x3144 bmdma 0x30f0 irq 19
ata4: SATA max UDMA/133 cmd 0x3120 ctl 0x3140 bmdma 0x30f8 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xe3325400
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xe3325000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00003080
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 0c8befe0c1e289e4d8990926117ada3bdfeb419c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 8:81:331
tty tty52: hash matches
rtc_cmos 00:01: setting system clock to 2016-03-06 13:19:17 UTC (1457270357)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 2-4: new high-speed USB device number 2 using ehci-pci
usb 2-4: New USB device found, idVendor=1a40, idProduct=0101
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB 2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33
ata4.00: applying bridge limits
ata3.00: ATA-7: SAMSUNG SP2004C, VM100-50, max UDMA7
ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/33
ata3.00: configured for UDMA/133
usb 2-4.1: new full-speed USB device number 3 using ehci-pci
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 300)
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 300)
ata1.00: ATA-10: GOODRAM C40, S9FM02.0, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA GOODRAM C40 02.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATA-8: Hitachi HDS721010CLA330, JP4OA3MA, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
tsc: Refined TSC clocksource calibration: 1864.803 MHz
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72101 A3MA PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2004C 0-50 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5
sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 < sdb5 >
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
systemd-udevd[119]: starting version 204
usb 2-4.1: New USB device found, idVendor=0a12, idProduct=0001
usb 2-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
scsi host4: pata_marvell
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
scsi host5: pata_marvell
ata5: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 17
ata6: DUMMY
firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
usb 2-4.2: new full-speed USB device number 4 using ehci-pci
usb 2-4.2: New USB device found, idVendor=046d, idProduct=c52b
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4.2: Product: USB Receiver
usb 2-4.2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-4.2/input2
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:19:d1:03:f7:9c
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
firewire_core 0000:07:03.0: created device fw0: GUID 0090270001b8a63a, S400
Switched to clocksource tsc
floppy0: no floppy controllers found
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 120 bits of entropy available
Adding 4122620k swap on /dev/sda5. Priority:-1 extents:1 across:4122620k SSFS
random: nonblocking pool is initialized
systemd-udevd[378]: starting version 204
lp: driver loaded but no devices found
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lp0: using parport0 (interrupt-driven).
[drm] Initialized drm 1.1.0 20060810
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000428-0x0000000000000429 (\GPE0) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x000000000000050c-0x000000000000050f (\IGPO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
usbcore: registered new interface driver btusb
cfg80211: Calling CRDA to update world regulatory domain
sound hdaudioC0D2: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D2: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
sound hdaudioC0D2: mono: mono_out=0x0
sound hdaudioC0D2: inputs:
sound hdaudioC0D2: Rear Mic=0xe
sound hdaudioC0D2: Front Mic=0xb
sound hdaudioC0D2: Line=0xf
ath5k 0000:07:01.0: registered as 'phy0'
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
logitech-hidpp-device 0003:046D:4048.0004: unable to retrieve the name of the device
input: Logitech Unifying Device. Wireless PID:4048 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.2/2-4.2:1.2/0003:046D:C52B.0003/0003:046D:4048.0004/input/input5
logitech-hidpp-device 0003:046D:4048.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4048] on usb-0000:00:1d.7-4.2:1
input: Logitech Dell WK636 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.2/2-4.2:1.2/0003:046D:C52B.0003/0003:046D:4049.0005/input/input6
logitech-hidpp-device 0003:046D:4049.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Dell WK636] on usb-0000:00:1d.7-4.2:2
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.96 Sun Nov 8 22:33:28 PST 2015
device-mapper: multipath: version 1.7.0 loaded
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
gpio_ich: GPIO from 462 to 511 on gpio_ich
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
init: cups main process (676) killed by HUP signal
init: cups main process ended, respawning
init: failsafe main process (689) killed by TERM signal
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
init: samba-ad-dc main process (805) terminated with status 1
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
floppy0: no floppy controllers found
work still pending
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1438) terminated with status 1
wlan0: authenticate with c4:6e:1f:f8:f0:00
wlan0: send auth to c4:6e:1f:f8:f0:00 (try 1/3)
wlan0: authenticated
wlan0: associate with c4:6e:1f:f8:f0:00 (try 1/3)
wlan0: RX AssocResp from c4:6e:1f:f8:f0:00 (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from c4:6e:1f:f8:f0:00 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with c4:6e:1f:f8:f0:00
wlan0: send auth to c4:6e:1f:f8:f0:00 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: associate with c4:6e:1f:f8:f0:00 (try 1/3)
wlan0: RX AssocResp from c4:6e:1f:f8:f0:00 (capab=0x431 status=0 aid=3)
wlan0: associated
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5011 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
steamwebhelper[25085]: segfault at fff86f79 ip 00000000f597354a sp 00000000ffb59ad0 error 4 in libcef.so[f1d4e000+5467000]
ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000